Directions


DIRECTIONS

 
fwymapsm.gif (68112 bytes)

Click on the map to find UCR and "Back" on your browser to return

From Los Angeles or Ontario Airport
From the 10 freeway: Take freeway 10 east to the 15 south to the 60 east. Exit University Avenue and turn left to go underneath the 60/215 freeway bridge and turn right at the second light on Campus Drive. Go to the kiosk (on the right) for parking information.

From Orange County Area
Take freeway 91 east to Riverside County. Exit University Avenue and turn right. Go underneath the 60/215 freeway bridge and turn right at the second light after the bridge on Campus Drive. Go to the kiosk (on the right) for parking information.

From San Diego Area
Take the 15 North freeway to the 215 North. Take the 60 Freeway west. Exit University Avenue, turn left and go to the first light and make a right on Campus Drive. Go to the kiosk (on the right) for parking information.

From Palm Springs
Take the 10 freeway west to the 60 Freeway East/215 South. Exit University Avenue and turn left to go underneath the 60/215 freeway bridge and turn right at the second light on Campus Drive. Go to the kiosk (on the right) for parking information.

Directions to Bourns Hall, College of Engineering

First, note the Parking Lot to which you are directed.  The following directions should help you get to Bourns Hall. From the Campus Drive information kiosk (off of University Avenue on north side of campus), take Campus Drive to intersection of Campus Drive and University Avenue. Turn right onto University Avenue. University Avenue makes a mandatory left turn and becomes Canyon Crest Drive Continue on Canyon Crest Drive to Linden Street (second traffic signal). Turn right on Linden Street and proceed to stop sign. Turn right onto Aberdeen Drive and proceed to stop sign. Aberdeen dead ends into Bourns Hall). From the Canyon Crest Drive information Kiosk on south side of campus, turn right onto Canyon Crest. Turn right at stop sign onto Campus Drive Follow Campus Drive, which makes three bends. At the fourth stop sign (from the right turn onto Campus Drive) Bourns Hall is on left side at the intersection of Aberdeen Drive and Campus Drive. Metered Parking may be available in Lot 10 just before you get to Bourns Hall.

For more information:

College of Engineering
University of California Riverside
Riverside, CA 92521-0144
Phone: 951-827-5190
Fax: 951-827-3188

or call my office at:

(951) 827-7717

 

Campus Maps

CampMapLrg.gif (61161 bytes)

BournsMap.gif (33027 bytes)

Click on campus map
above to expand

Click on map above to 
locate Bourns Hall

 

Office

Bourns Hall, Room A-345. Note Building A of Bourns Hall is on the North side. You will see a bridge connecting Buildings A and B across the second floors. The Department of Mechanical Engineering Office Suite is also located on the 3rd floor of Bourns Hall in A368.

Laboratory

Bourns Hall, Room B-342A. Note Building B of Bourns Hall is on the South side.