Back to Field Measurements

  Instrument Quantity Application
1. Sonic Anemometer – 3D – CSAT3 Campbell Sci 3 Fast wind and virtual temperature measurements- turbulent fluxes
2. Net Radiometer – CNR1 Kipp & Zonen 1 Solar and far infrared radiation
3. Krypton Hygrometer – KH20 1 Water vapor fluctuations – latent heat flux
4. Aerosol Monitor – DUSTTRAK 8520
 TSI Inc. with environmental enclosures 8520-1
2 Particulate matter (PM2.5, PM10 and PM1) concentration
5. Temperature and RH probe –
 HMP45C-L Vaisala
1 Air Temperature and relative humidity
6. Infra-red thermocouple – IRTS-P Apogee 1 Surface temperature
7. Data logger – CR5000 Campbell Sci 2 Data logging – fast response
8. Data logger – CR23 Campbell Sci 1 Data logging
9. Averaging soil thermocouple probe – TCAV-L 1 Averaged soil temperature
10. Soil heat flux plate – HFP01SC-L Hukseflux 1 Soil heat flux – bottom boundary
11. Water content reflectometer –
CS616-L
1 Soil water content
12. 10 m Tower – UT20 Universal Tower 2 Equipment mounting up to 10 m
13. 3 m Tripod – CM10 2 Equipment mounting up to 3 m
14. Solar panel – MSX128R 128W regulated 2 Solar power, battery recharging
15. Miscellaneous – Laptop (2), GPS (Garmin 76), Compass (Brunton Transit 2061), Environmental enclosures (2 ENC 16/18 Campbell Sci), radiation shield (41003 RM Young), radio controlled clock, extension cords, tool box, power converter, deep cycle batteries, battery charger    
Back to Field Measurements